If your Pit Boss Pro Series auger isn’t turning, the first thing you should check is whether there is something blocking the auger blades. If the blades are clear, the next thing to check is whether the motor is getting power. If the motor isn’t getting power, make sure that the circuit breaker hasn’t tripped and that all of the connections are secure.
If the motor is getting power but still not working, it may be defective and will need to be replaced.
The issue with the Pit Boss Pro Series auger not turning could be caused by a lack of power or a malfunctioning gear system. It is recommended to check the power source and connections, as well as the gears for any damage or obstruction. Consult the user manual for troubleshooting steps or contact customer support for assistance.
Pit Boss Pro Series Auger Not Turning [Solve Here]
There are several possible causes for the auger not turning, and it is important to troubleshoot the issue to determine the root cause before attempting to fix it.
Possible Causes:
- Lack of power: Make sure the grill is plugged in and that the outlet is functioning properly. Check the circuit breaker to ensure that it has not tripped.
- Obstruction in the auger: Check for any foreign objects that may have become lodged in the auger tube or gears. Clear any obstruction that you find.
- Malfunctioning gear system: The gears of the auger may be damaged or worn out, preventing them from turning. Check for any visible damage and replace the gears if necessary.
- Control board issue: The control board may have malfunctioned, causing the auger to stop turning. Contact customer support for further troubleshooting.
Solutions:
- To resolve the lack of power issue, ensure the grill is plugged in and that the outlet is functioning properly. If the circuit breaker has tripped, reset it and try turning on the grill again.
- To clear an obstruction in the auger, turn off the grill and unplug it. Use a long, thin object like a chopstick or a screwdriver to remove any foreign objects that may have become lodged in the auger tube or gears.
- If the gears are damaged or worn out, they will need to be replaced. Consult the user manual or contact customer support for instructions on how to do this.
- If the control board has malfunctioned, it will likely need to be replaced. Contact customer support for assistance.
Pit Boss Not Feeding Pellets
If your Pellet Grill isn’t feeding pellets, there are a few things you can check to try and remedy the situation. First, check the auger to make sure that it is clear of any debris. Next, check the hopper to see if it needs to be refilled.
If neither of these solutions solves the problem, you may need to replace the feed system entirely.
Pellet Grill Auger Not Turning
If your pellet grill’s auger isn’t turning, there are a few things you can do to try to fix the problem. First, check the power source to make sure that the grill is plugged in and receiving power. Next, check the auger motor to see if it is defective.
Finally, clean or replace the Pellet Pro ® Auger Drive Assembly.
How to Clean Auger on Pit Boss Pro Series
If you own a Pit Boss Pro Series smoker, you know how important it is to keep the auger clean. The auger is responsible for feeding wood pellets into the fire pot, and if it isn’t clean, your smoker won’t work correctly. Here are some tips on how to clean your auger:
- First, make sure that your smoker is turned off and cooled down completely. You don’t want to be working with a hot auger!
- Next, remove the pellet hopper from the smoker. This will give you better access to the auger.
- Use a brush or vacuum cleaner to remove any debris from around the auger shaft. Be careful not to damage the shaft itself.
- Once the area around the shaft is clean, you can begin cleaning the inside of the auger itself. Again, use a brush or vacuum cleaner to remove any debris or buildup inside the tube. Pay special attention to the area where the pellets drop into the fire pot – this is where most of the buildup will occur.
Pit Boss Auger Will Not Turn
Frequently Asked Questions (FAQs):
Why is My Auger Not Turning on My Pit Boss?
If your auger is not turning on your Pit Boss, the first thing you should check is whether or not there is power getting to the unit. If the unit is plugged in and there is still no power, you may have a blown fuse or tripped circuit breaker. Check your home’s electrical panel to reset the breaker or replace the fuse.
If there is power to the unit, the next thing to check is whether or not the auger motor itself is defective. Unplug the unit and open up the housing to access the motor. Use a multimeter to test for continuity between the two leads on the motor.
If there is no continuity, then the motor will need to be replaced.
How Do You Fix a Stuck Auger on a Pit Boss Pellet Grill?
If your auger is stuck, the first thing you should do is check the Pellet Hopper Assembly. If the auger is jammed, it could be because there is something blocking it. The most likely culprit is a foreign object that has gotten caught in the auger.
Sometimes pellets themselves can get lodged in the auger, so be sure to check for that as well. Once you’ve checked the Pellet Hopper Assembly and cleared any blockages, if the auger still won’t turn, it’s time to contact Pit Boss customer service. They will be able to help you troubleshoot the issue and get your grill back up and running in no time!
How Do You Know If Your Auger is Jammed?
If your auger is jammed, you’ll know it. The first sign is usually that the motor slows down or stops completely when you try to use it. If you can’t get the auger unjammed, you’ll have to call a professional.
Why Won’t My Pellet Grill Feed Pellets?
If your pellet grill isn’t feeding pellets, there are a few potential reasons why. The first thing to check is whether or not there are actually pellets in the hopper. If so, then it’s possible that the auger isn’t turning, which means that the pellets aren’t being fed into the fire pot.
Another possibility is that the igniter isn’t working properly, in which case you’ll need to replace it. Finally, it could be that the temperature sensor is faulty, causing the pellet grill to think that it’s too cold to cook even though it’s not.
Conclusion
If your Pit Boss Pro Series auger isn’t turning, there are a few things you can do to troubleshoot the issue. First, check to make sure that the auger is properly plugged in and that there is power going to it. Next, check the auger blades to see if they are dull or damaged.
If they are, you will need to replace them. Finally, check the transmission fluid level and add more if needed.
