Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
If the auger motor on your Traeger grill is not turning, there are a few things you can check to troubleshoot the issue. First, make sure that the power cord is plugged in and that the circuit breaker is not tripped. Next, check to see if the auger motor is getting power by testing it with a multimeter.
If there is no power going to the motor, you will need to replace the controller board. Finally, if the motor is receiving power but still not working, it may be defective and will need to be replaced.
Troubleshooting: How to Clear a Jammed Auger
If you own a Traeger Pellet Grill, you may have experienced the frustration of your Traeger auger motor not turning. This can be a real problem, as it prevents your grill from working properly and can even cause damage to the pellets. Thankfully, there are a few things you can do to try and fix this problem.
First, check to make sure that the pellet hopper is not obstructed. Sometimes pellets can get stuck in the hopper and prevent the auger from turning. If this is the case, simply remove the pellets and clear any obstructions.
Next, check the auger motor itself for any signs of damage or wear. If it looks damaged, it may need to be replaced. However, if it just looks worn down, you may be able to clean or lubricate it to get it working again.
Finally, if none of these solutions work, you may need to contact Traeger customer service for further assistance. They will likely be able to help you troubleshoot the issue and find a resolution.
Traeger Auger Motor Problems
If you own a Traeger grill, you may have experienced problems with your auger motor. The auger is responsible for feeding wood pellets into the fire pot to create the flame that cooks your food. If the auger motor stops working, your grill will be unable to create enough heat to cook your food properly.
There are a few potential causes of this problem:
- The most common cause is simply that the pellets have jammed in the feed tube. This can happen if the pellets get damp or if they are old and stale. To fix this, simply clear out the feed tube and make sure there are no obstructions.
- Another possible cause is that the auger motor itself has burned out. This is more serious and will require replacement of the entire assembly. However, it is still a relatively easy fix that can be done at home with some basic tools.
- Finally, it is also possible that there is an issue with the wiring between the controller and the auger motor. This will require some troubleshooting to identify and fix, but again, it is something that can be done at home by following a few simple steps.
Traeger Auger Motor Fan Not Working
If your Traeger auger motor fan isn’t working, there are a few things you can do to try and fix the problem. First, check the circuit breaker and make sure it’s not tripped. If it is, reset it and see if that fixes the problem.
If not, unplug the pellet grill and remove the auger motor fan assembly. Inspect the fan blades for any damage and make sure they’re all intact. Also, check the wiring to make sure there are no loose connections.
Once you’ve checked all of these things, reassemble the auger motor fan assembly and plug the pellet grill back in. Hopefully this will get your Traeger grill up and running again!
Traeger Auger Motor Loose
If you have a Traeger smoker, you know that one of the most important parts is the auger motor. This part is responsible for moving the wood pellets from the hopper to the fire pot, and if it isn’t working properly, your smoker won’t function correctly. One common issue that can occur is a loose auger motor.
If your auger motor is loose, it’s important to take care of the problem as soon as possible. A loose auger motor can cause all sorts of issues, including poor performance and even safety hazards. There are a few different ways to fix a loose auger motor.
The first thing you can try is to simply tighten the screws that hold it in place. If this doesn’t work, you may need to replace the gasket or O-ring that seals the connection between the motor and fire pot. Finally, if neither of these solutions works, you may need to replace the entire auger motor assembly.
While a loose auger motor can be a pain, it’s relatively easy to fix if you know what you’re doing. Be sure to take care of the problem as soon as possible so you can get back to smoking delicious food!
Traeger Auger Jammed With Wet Pellets
If your Traeger auger is jammed with wet pellets, don’t despair! There are a few things you can do to try and fix the problem.
First, check the auger motor to make sure it is receiving power.
If it is, then the next step is to clear any obstruction that might be causing the jam. This could be anything from wet pellets to debris in the bottom of the hopper.
Once you’ve cleared the obstruction, restart your Traeger and see if it’s working properly again.
If not, you may need to replace the auger motor or other parts of your grill.
Frequently Asked Questions (FAQs):
Why is My Traeger Auger Not Turning?
If your Traeger auger is not turning, there are a few potential causes. First, check to make sure that there is power getting to the unit. Next, check for any blockages in the auger tube or around the auger itself.
Finally, if neither of these solutions solve the problem, it may be necessary to replace the auger motor.
How Do You Know If Your Auger Traeger Motor is Bad?
If your auger Traeger motor is bad, there are a few things you can look for to be sure. One is whether or not the auger turns at all when you try to start it. If it doesn’t turn, then the problem is most likely with the motor itself and not with the auger.
Another way to tell if the motor is bad is by listening for any strange noises coming from it when it’s running. If you hear anything that sounds abnormal, that’s another sign that something may be wrong with the motor.
How Do You Test a Traeger Auger Motor?
To test a Traeger auger motor, you’ll need to first disconnect the power source. Next, remove the hopper lid and access the auger motor. With a multimeter set to the ohms setting, touch one lead to the black wire terminal on the motor and touch the other lead to the ground screw on the motor housing.
The reading should be between 50-100ohms. If it’s not, then the auger motor needs to be replaced.
How Do You Fix a Stuck Traeger Auger?
If you’re having trouble with your Traeger auger getting stuck, there are a few things you can do to try and fix the issue. First, make sure that the hopper is not overfilled. If it is, try removing some of the pellets so that the auger has less to move.
Secondly, check the condition of the pellets themselves. If they’re old or damp, they may be causing the issue. Try replacing them with fresh pellets and see if that makes a difference.
Finally, if none of these solutions work, you may need to contact Traeger customer service for further troubleshooting assistance.
Conclusion
If the auger motor on your Traeger pellet grill isn’t turning, there are a few things you can do to try and fix the issue. First, check the power source to make sure that the grill is plugged in and receiving power. Next, check the auger drive belt to see if it has come loose or broken.
If either of these are the case, then you’ll need to replace the part. Finally, if neither of these are the issue, then it’s likely that there is something wrong with the auger motor itself and you’ll need to contact customer service for further assistance.
