Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
If your Pit Boss igniter not working, the first thing you should check is the battery. If it’s a new battery, try replacing it with another one. If that doesn’t work, make sure the wires are securely attached to the igniter and there is no corrosion.
You can also try gently tapping on the igniter to see if that gets it working. If none of these things work, you may need to replace your igniter.
Pit Boss Igniter Not Working: 3 Causes & Fixes
If you own a Pit Boss pellet grill, you know how important it is to have a reliable igniter. Without a functioning igniter, you won’t be able to start your grill, which can be frustrating, especially when you have a party or a cookout coming up.
In this article, I will discuss the causes and fixes for a Pit Boss igniter not working.
Causes of a Pit Boss Igniter Not Working:
Damaged Igniter Element:
The most common reason for a Pit Boss igniter not working is a damaged igniter element. Over time, the heating element may get covered in grease and debris, making it difficult to start the fire. This can also happen if the igniter is exposed to moisture or if it’s not handled with care.
Loose or Disconnected Wires:
Another possible cause of a Pit Boss igniter not working is loose or disconnected wires. If the wires connecting the igniter to the control board are loose or disconnected, the igniter won’t be able to receive the electrical current needed to start the fire.
Malfunctioning Control Board:
A malfunctioning control board can also be a reason for a Pit Boss igniter not working. The control board is responsible for sending the electrical current to the igniter, and if it’s not functioning correctly, the igniter won’t receive the necessary power to start the fire.
Fixes for a Pit Boss Igniter Not Working:
Clean the Igniter Element:
If the igniter element is covered in grease and debris, it won’t be able to heat up properly, causing the fire not to start. To fix this issue, you’ll need to clean the igniter element using a soft brush or cloth. Make sure to be gentle while cleaning the element to avoid damaging it.
Check the Wires:
If the wires connecting the igniter to the control board are loose or disconnected, you’ll need to reconnect them. First, turn off the grill and unplug it. Then, remove the cover and locate the wires. Make sure they are tightly connected, and if necessary, replace any damaged wires.
Test the Control Board:
If the igniter element and wires are working correctly, the issue may be with the control board. To test the control board, you’ll need a multimeter. First, turn off the grill and unplug it. Then, remove the cover and locate the control board. Use the multimeter to test the voltage output of the control board. If the voltage output is low or zero, the control board is malfunctioning and needs to be replaced.
A Pit Boss igniter not working can be a frustrating issue, but it’s usually easy to fix. By following the above steps, you’ll be able to diagnose and fix the issue, ensuring your grill is always ready for your next cookout.
If you’re still having trouble after attempting these fixes, it’s best to contact a professional for further assistance.
Another common issue with Pit Boss grills is the display not working, which can be related to the igniter not working.
Pit Boss Igniter Fuse
If your Pit Boss smoker isn’t igniting, it may be due to a blown fuse. In this blog post, we’ll show you how to check and replace the igniter fuse on your smoker. First, locate the fuse box on your Pit Boss smoker.
It will be near the control panel or power cord. Inside the fuse box, you’ll see a small cylindrical fuse with two wires attached to it. To check if the fuse is blown, use a multimeter to test for continuity between the two wire terminals.
If there is no continuity, then the fuse is blown and needs to be replaced. Replacing the igniter fuse is easy simply unscrew the old fuse and screw in a new one of the same size and rating. Once you’ve replaced the fuse, try igniting your smoker again.
If it still doesn’t work, there may be another issue at play such as a faulty ignition switch or bad wiring.
Pit Boss Igniter Test
Pit Boss Igniter Test If you’re having trouble igniting your Pit Boss smoker, it’s likely due to a faulty igniter. To test whether or not your igniter is working properly, follow these steps:
- Remove the igniter from the smoker. You’ll find it near the bottom of the unit, attached to the control panel.
- Use a multimeter to test the continuity of the igniter. If there is no continuity, then the igniter is defective and will need to be replaced.
- If the multimeter does show continuity, then try testing the igniter with a 9-volt battery. Touch one end of the battery to the metal tip of the igniter and touch the other end of the battery to one of the terminals on the control panel make sure that you do not touch both terminals at once.
Pit Boss Igniter Error Code
If you’re a Pit Boss smoker owner, you know that there’s nothing quite like the taste of smoked food. But what do you do when your smoker stops working? If you’re getting an igniter error code, it means that there’s a problem with the igniter in your smoker.
There are a few things that could be causing this problem. It could be something as simple as a dirty igniter wire or it could be a more serious issue like a faulty igniter coil. In either case, it’s important to troubleshoot the problem so that you can get your smoker up and running again.
Here are some tips for troubleshooting an igniter error code on your Pit Boss smoker:
- Check the Igniter Wire – The first thing you’ll want to do is check the igniter wire for dirt or debris. If the wire is dirty, it can prevent the current from flowing properly and cause an error code. Cleaning the wire with a brush should fix the problem.
- Check the Igniter Coil – If cleaning the wire doesn’t fix the problem, then it’s likely that there’s an issue with the igniter coil itself. You’ll need to replace the coil if it’s damaged or defective.
- Replace Batteries – If neither of those solutions fixes the problem, then it’s possible that your batteries are dead or dying. Try replacing them with fresh batteries and see if that clears up the error code.
- Call Customer Service – If you’ve tried all of those tips and you’re still getting an error code, then it’s time to call customer service for assistance.
Pit Boss Igniter Fuse Replacement
Pit Boss Igniter Fuse Replacement If your Pit Boss smoker isn’t igniting, it might be due to a faulty igniter fuse. Luckily, this is an easy fix that you can do yourself!
Here’s how to replace the igniter fuse on your Pit Boss smoker:
- First, locate the igniter fuse on the back of the control panel. It will be a small, cylindrical piece with two wires attached to it.
- Using a Phillips head screwdriver, remove the screws that hold the old igniter fuse in place.
- Pull out the old igniter fuse and discard it.
- Insert the new igniter fuse into the slot where the old one was located. Make sure that the wires are properly aligned before screwing it in place.
- Replace the screws and tighten them down firmly. Be careful not to over-tighten as this could damage the threads.
Frequently Asked Questions (FAQs):
Why is My Pit Boss Not Igniting?
If your Pit Boss is not igniting, it is most likely due to one of the following reasons:
1. The Igniter Is Dirty or Broken One of the most common reasons why a Pit Boss won’t ignite is because the igniter is either dirty or broken. If your igniter is dirty, it will need to be cleaned with a wire brush. If your igniter is broken, you will need to replace it.
2. The Burners Are Clogged. Another common reason why a Pit Boss won’t ignite is because the burners are clogged. Over time, grease and debris can build up on the burner heads and eventually cause them to become clogged. To clean the burners, use a wire brush and scrub away any built-up grease and debris.
3. There Is A Gas Leak A third possibility as to why your Pit Boss won’t ignite is because there may be a gas leak somewhere in the system. This is obviously a serious issue that needs to be addressed immediately as it could lead to an explosion if left unchecked.
If you suspect there may be a gas leak, turn off all valves leading to the unit and call a certified technician right away.
Why is My Pit Boss Griddle Igniter Not Working?
If your Pit Boss griddle igniter is not working, there are a few things you can check to troubleshoot the issue. First, make sure that the power switch is in the ON position and that the griddle is plugged into a properly functioning outlet. Next, check the batteries in the igniter – they may need to be replaced.
If neither of these solutions solves the problem, it is likely that there is an issue with the igniter itself and you will need to contact customer service for further assistance.
Why is My Smoker Not Igniting?
If your smoker is not igniting, there are a few potential reasons why. The most common reason is that the smoker is out of fuel. Check to see if you need to add more wood, charcoal or pellets to get the fire going.
If the smoker is full of fuel but still won’t ignite, the next most likely problem is that the air vents are blocked. Make sure all of the vents are open so that air can flow through and help to light the fire. If those two things don’t solve the problem, it’s possible that there is an issue with your igniter.
Try using a different igniter or lighter to see if that gets things going. If all else fails, it’s time to call customer service for help troubleshooting your smoker.
How Do You Replace a Pit Boss Igniter?
If your Pit Boss smoker isn’t igniting, it may be time to replace the igniter. Here’s how to do it:
1. Remove the control panel from the smoker by unscrewing the four screws that hold it in place.
2. Disconnect the wires from the igniter by pulling them off of the terminal posts.
3. Remove the two screws that hold the igniter in place and take out the old igniter. 4. Insert the new igniter into place and screw it in securely.
5. Reconnect the wires to their respective terminal posts on the new igniter. Make sure they’re tight so they don’t come loose while you’re cooking. 6 That’s it!
Conclusion
If your Pit Boss igniter isn’t working, there are a few things you can do to try and fix it. First, make sure that the batteries are fresh and installed correctly. Next, check the connection between the igniter and the electrode.
If everything looks good there, try cleaning the electrode with a wire brush. Finally, if none of those things work, you may need to replace the igniter itself.
![Read more about the article Pit Boss Kc Combo Problems – [Reasons And Solutions]](https://i0.wp.com/kitchengriller.com/wp-content/uploads/2023/01/Dewalt-Circular-Saw-20V-Problems-Fixes-and-Solutions-20.jpg?fit=300%2C180&ssl=1)
