Troubleshooting Guide for Pit Boss Fan Not Working

If your Pit Boss fan not working, there are a few things you can check. First, make sure that the power cord is plugged in and that the outlet is working. Next, check the fuse or circuit breaker.

If neither of these is the problem, then it may be an issue with the motor itself. If you have a multimeter, you can test the continuity of the motor windings to see if they are intact. Finally, if all else fails, you may need to replace the fan motor.

Common Reasons for Pit Boss Fan Malfunction

Here are some common reasons for Pit Boss fan malfunction:

  1. Lack of Proper Maintenance and Cleaning: Pit Boss fans are exposed to smoke, grease, and other cooking residues, which can cause buildup and clogging of the fan blades, causing the fan to work improperly or stop altogether. Regular cleaning and maintenance of the fan blades and housing are essential for optimal performance.
  2. Fan Motor Failure: The fan motor is the primary component responsible for driving the blades to circulate air inside the grill. If the motor fails, the fan will stop working. This may be due to wear and tear or overheating caused by prolonged use or exposure to high temperatures.
  3. Damaged Wiring or Electrical Components: Electrical wiring and components inside the grill can become damaged due to wear and tear exposure to moisture, or other factors. Damaged wiring or electrical components can prevent the fan from receiving the necessary power to function properly.
  4. Loose or Disconnected Fan Blades: If the fan blades are loose or disconnected from the motor shaft, they will not be able to circulate air properly, leading to uneven heat distribution and other issues.
  5. Malfunctioning Control Board or Sensor: The control board and sensor in a Pit Boss grill regulate the temperature and communicate with the fan to maintain optimal heat distribution. If the control board or sensor malfunctions, it can cause the fan to stop working or function improperly.

It is important to identify the cause of the malfunctioning fan to address the problem properly. Troubleshooting and repair will be covered in the next section.

Symptoms of a Malfunctioning Pit Boss Fan

A malfunctioning Pit Boss fan can cause a variety of symptoms that can affect the quality of your cooking. Here are some common symptoms of a malfunctioning Pit Boss fan:

  1. Difficulty Achieving or Maintaining Desired Cooking Temperatures: A properly functioning fan circulates hot air throughout the grill, which helps maintain consistent temperatures. If the fan is not working correctly, the grill may have difficulty achieving or maintaining the desired cooking temperature, leading to undercooked or overcooked food.
  2. Uneven Heat Distribution Across the Grill Surface: When the fan is not working properly, it can cause uneven heat distribution across the grill surface. This can lead to hot spots and cool spots, resulting in unevenly cooked food.
  3. Increased Pellet Consumption: A malfunctioning fan may cause increased pellet consumption as the grill struggles to maintain the desired temperature. This can lead to higher fuel costs and more frequent pellet refills.
  4. Excessive Smoke Production: If the fan is not circulating the air properly, it can lead to excessive smoke production, which can affect the flavor and quality of your food.

If you are experiencing any of these symptoms, it is important to troubleshoot and identify the cause of the problem. Some issues may be easily fixed with simple maintenance and cleaning, while others may require more extensive repairs or replacement of parts.

If you’re facing the frustrating problem of a Traeger grill fan not working, you can check out this helpful article for tips on how to diagnose and fix the issue.

Why Your Pit Boss Fan Not Working and How to Fix It

pit boss fan not working

If you’re a fan of outdoor cooking, then chances are you’ve heard of Pit Boss grills. These grills are known for their high quality and great performance. However, even the best grills can encounter problems. One common issue Pit Boss owners face is their fans not working properly.

In this article, we’ll explore the causes of this issue and provide some tips on how to fix it.

Check the Power Source:

The first step in troubleshooting your Pit Boss fan is to make sure that it’s receiving power. Check the power source and ensure that it’s properly connected. If you’re using an extension cord, make sure that it’s not damaged or frayed. You can also try plugging in another device to the same outlet to see if it’s working.

Clean the Fan Blades:

Another common cause of Pit Boss fans not working is dirty fan blades. Over time, dust and debris can accumulate on the blades, which can cause the fan to stop working properly. To fix this issue, you’ll need to clean the fan blades. You can use a soft brush or compressed air to remove any debris. Be sure to clean both sides of the blades.

Check the Wiring:

If your Pit Boss fan still isn’t working after checking the power source and cleaning the fan blades, the next step is to check the wiring. Inspect the wiring to ensure that there are no loose connections or damaged wires. You may need to consult the owner’s manual to identify the wires that are responsible for powering the fan.

Replace the Fan Motor:

If none of the above steps have resolved the issue, then it’s likely that the fan motor has failed. In this case, you’ll need to replace the fan motor. You can purchase a replacement motor from a Pit Boss dealer or online. Be sure to follow the manufacturer’s instructions when installing the new motor.

If your Pit Boss fan is not working properly, there are several steps you can take to fix the issue. Start by checking the power source and cleaning the fan blades. If those steps don’t work, inspect the wiring and consider replacing the fan motor. With a little troubleshooting, you can get your Pit Boss fan working like new again.

Overall, it’s important to take care of your Pit Boss grill to ensure that it continues to perform at its best. Regular cleaning and maintenance can go a long way in preventing issues from arising.

If you’re ever unsure about how to fix a problem with your Pit Boss grill, consult the owner’s manual or contact a professional for assistance.

pit boss pellet smoker induction fan diagnosis and repair

If your Pit Boss fan isn’t working, there are a few things you can check to see if you can get it up and running again. First, make sure that the power cord is plugged into an outlet and that the switch on the back of the unit is in the “on” position. Next, check to see if the fan blades are clean – if they’re not, use a soft cloth to wipe them down.

Finally, check to see if the motor itself is dirty – if it is, you can try cleaning it with a soft brush. If none of these things work, then you may need to replace the fan altogether.

How Long Does Pit Boss Fan Stay on

Pit Boss Fan Stay on Most of the time, a Pit Boss fan will stay on for around 10 minutes. However, if you are using your Pit Boss in extremely hot weather or if your fire is particularly large, the fan may stay on for longer periods of time.

Pit Boss Pro Series Fan

If you’re looking for a powerful and reliable fan for your Pit Boss smoker, look no further than the Pro Series Fan. This fan is specifically designed to work with Pit Boss smokers, and it’s built to last. The Pro Series Fan is made from heavy-duty materials and features a high-powered motor that can move a lot of air.
Additionally, the Pro Series Fan comes with a mounting bracket that makes installation a breeze.

Pit Boss Fan Pulsing

If you’ve ever had a pellet smoker, you know that one of the most important aspects is having a good fan. The fan circulates air through the smoker, and if it’s not working properly, your food will not cook evenly. A problem that can occur with fans is pulsing.

This is when the fan speed slows down and then speeds up again, causing the temperature in the smoker to fluctuate. This can be a major problem if you’re trying to smoke something like a brisket, which needs to be cooked low and slow. There are a few things that can cause your fan to pulse.

One is simply age – over time, parts in the motor can start to wear out and cause the fan speed to fluctuate. Another possibility is something called “voltage sag.” This occurs when there’s an insufficient power supply to run the fan at its full speed.

If you live in an area with unreliable electricity or frequently have power surges, this could be an issue for you. The good news is that there are ways to fix both of these problems so that your fan runs smoothly and your food cooks evenly every time. For aging motors, it’s often as simple as replacing worn-out parts – most manufacturers sell replacement kits specifically for this purpose.

If voltage sag is an issue, you may need to invest in a higher-quality power supply or use a voltage regulator to keep things running smoothly. No matter what the cause of your fan pulsing is, there’s likely a solution so you can get back to cooking great food on your pellet smoker!

Frequently Asked Questions (FAQs):

How Do You Fix the Fan on a Pit Boss Pellet Grill?

If your Pit Boss pellet grill is not working properly, one potential issue could be the fan. The fan helps to circulate air within the grill, and if it is not working correctly, it can affect how well your grill cooks. Luckily, there are a few things you can do to try and fix the problem.

First, make sure that the fan is clean. Sometimes debris can build up on the blades and prevent the fan from spinning properly. Use a soft brush or cloth to gently remove any dirt or dust that may be blocking the blades.

Next, check to see if the fan is loose. Over time, vibrations from using the grill can cause the fan to become loose in its housing. If this is the case, simply tighten the screws that hold it in place.

If neither of these solutions works, then you may need to replace the entire fan assembly. This is a more involved repair, but it should still be relatively easy to do yourself. Just follow these steps:

1) Disconnect power to the grill by unplugging it from the outlet or flipping off the circuit breaker.
2) Remove any food or debris from inside of the grill so you can access everything easily.

Does the Fan Run All the Time on a Pellet Grill?

No, the fan does not run all the time on a pellet grill. The fan is used to help circulate air around the pellets and keep them burning. The fan will turn on and off as needed to maintain the temperature you set it at.

Why is There No Smoke Coming Out of My Pit Boss?

If you own a Pit Boss, you may have noticed that there is no smoke coming out of the smoker. There are a few reasons why this may be happening. First, check to make sure that your wood pellets are dry.

If they are wet, they will not produce smoke. Second, check the auger to see if it is jammed. The auger is what feeds the wood pellets into the firepot.

If it is jammed, it will not feed the pellets into the firepot and therefore they will not burn and create smoke. Finally, check the air intake damper to make sure it is open. The air intake damper regulates how much air flows into the firepot.

If it is closed, not enough air will flow into the firepot and the wood pellets will not burn properly and create smoke. If you have checked all of these things and there still is no smoke coming out of your Pit Boss, contact customer service for further assistance.

Does Pit Boss Pellet Grill Have a Fuse?

Pit Boss pellet grills do not have a fuse. This is because they use an electronic ignition system that does not require a fuse. The electronic ignition system is powered by batteries, so you will need to make sure that the batteries are fresh and working properly before using your grill.

If you find that your grill is not igniting, it is likely due to a problem with the batteries or the ignition system itself.


If your Pit Boss fan stops working, there are a few things you can do to try and fix it. First, check the batteries. If they are low or need to be replaced, that could be the problem.

Next, check the connections to make sure they are tight and secure. Finally, if all else fails, you can contact customer service for assistance.

Robert Dennis

I am Robert Dennis - A professional grill and smoker technician, I have over 10 years of experience in the industry. I am skilled in the repair and maintenance of all types of grills and smokers and am knowledgeable in the use of a variety of tools and techniques. I share my knowledge and experience to help readers understand the inner workings of grills and smokers and how to maintain them properly. I am dedicated to providing the best information to help readers keep their grills and smokers in top working condition. - Serve Yourself -

Leave a Reply