Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
If your Pit Boss heating element not working, the first thing you should check is whether or not there is power going to the element. If there is no power, the element may be burned out and will need to be replaced. If there is power, the next thing to check is whether or not the element is getting hot.
If it’s not getting hot, it may be because the airflow around the element is blocked. Check for any obstructions and remove them if necessary.
Pit Boss Heating Element Not Working- Causes and Solutions
If you own a Pit Boss pellet grill or smoker, you may encounter a common issue: the heating element doesn’t heat up properly or at all. This problem can be frustrating, especially if you want to cook your favorite food and enjoy a juicy and smoky flavor. Fortunately, there are several causes and solutions for this problem that you can try before giving up on your Pit Boss.
In this article, I will explore the most likely reasons why your Pit Boss heating element not working and how to fix it.
Cause 1: Power Supply Problem
One of the most common causes of a non-working Pit Boss heating element is a power supply problem. If your grill doesn’t have enough power, it won’t be able to ignite the pellets and generate heat. To check if your Pit Boss is getting enough power, you can try the following steps:
- Make sure your Pit Boss is plugged into a grounded and functional outlet.
- Check if the outlet has power by plugging in another device, such as a lamp or a phone charger.
- Check if the power cord of your Pit Boss is intact and not damaged.
- Check if the fuse or circuit breaker in your house is not tripped or blown.
- Check if the control board of your Pit Boss is not malfunctioning or displaying error codes.
Solution 1: Check and Fix the Power Supply
If you find any issues with the power supply, you can try the following solutions:
- Plug your Pit Boss into a different outlet or extension cord that has enough power.
- Replace the power cord or the fuse if they are damaged or worn out.
- Reset the circuit breaker or replace the blown fuse if they are the source of the problem.
- Check the user manual or contact the customer service of Pit Boss for troubleshooting tips if the control board is not working properly.
Cause 2: Auger Jam or Blockage
Another possible cause of a non-working Pit Boss heating element is an auger jam or blockage. The auger is part of your grill that feeds the pellets into the firepot, where they are ignited and produce heat. If the auger is stuck or clogged, it won’t be able to deliver the pellets to the firepot, and the heating element won’t heat up.
Solution 2: Clear the Auger Jam or Blockage
To clear the auger jam or blockage, you can try the following steps:
- Turn off and unplug your Pit Boss.
- Remove the hopper and the grate, and access the auger from the bottom.
- Check if the auger is clogged with pellets, debris, or grease, and remove them with a brush or a vacuum cleaner.
- Check if the auger motor is working properly by testing it with a multimeter or listening for its sound.
- Lubricate the auger with food-grade oil or grease to prevent future jams or blockages.
Cause 3: Faulty or Broken Heating Element
A less common but possible cause of a non-working Pit Boss heating element is a faulty or broken element. If the heating element is damaged or disconnected, it won’t be able to generate heat, and you may need to replace it.
Solution 3: Replace the Heating Element
To replace the heating element of your Pit Boss, you can try the following steps:
- Turn off and unplug your Pit Boss.
- Remove the cooking grates, the heat shield, and the firepot, and access the heating element from the back.
- Check if the heating element is damaged, burned out, or disconnected, and replace it with a new one if necessary.
- Follow the user manual or online tutorials to install the new heating element properly and safely.
- Test your grill before using it to ensure that the heating element is working and heating up properly.
Pit Boss Heating Element Replacement
If you have a Pit Boss smoker, you know that one of the most important parts is the heating element. Without it, you can’t cook your food! If your heating element goes out, don’t worry – it’s an easy fix.
You just need to replace the heating element. To do this, first, make sure that your smoker is unplugged and cooled down. Then, remove the screws that hold the element in place.
You may need a screwdriver or drill for this. Once the screws are removed, carefully pull out the old heating element and dispose of it properly. Now it’s time to install the new heating element.
Put it in place and secure it with the screws you removed earlier. Make sure that everything is tight and secure before plugging your smoker back in and turning it on. Now you’re ready to start smoking again!
This process is simple and only takes a few minutes to complete. So if your heating element ever goes out, don’t panic – just follow these steps and you’ll be back up and running in no time!
Pit Boss Takes Forever to Heat Up
If you’re wondering why your Pit Boss smoker is taking forever to heat up, there are a few things that could be the culprit. First, check to make sure that all of the vents are open. If any of them are closed, this will restrict airflow and prevent your smoker from reaching its optimal temperature.
Next, take a look at the charcoal basket. If it’s full of ash, this can insulate the coals and prevent them from getting hot enough to produce good smoke. Finally, check the firebox door to make sure it’s fully closed.
A gap in the door will allow heat to escape, making it harder for your smoker to reach its target temperature. If you’ve checked all of these things and your Pit Boss still isn’t heating up properly, give us a call and we’ll be happy to help troubleshoot the problem.
Why is My Pit Boss Electric Smoker Not Heating Up
If your Pit Boss electric smoker is not heating up, there are a few things you can check to troubleshoot the issue. First, make sure that the power cord is plugged into an outlet and that the smoker is turned on. Next, check to see if the heating element is working by feeling the heat coming from the element itself.
If it is not hot, then it may need to be replaced. Finally, ensure that there is adequate ventilation for the smoker by making sure all of the vents are open.
Pit Boss Temp Lower Than Setting
If your Pit Boss smoker is running too hot or too cold, it’s likely that the temperature setting on the control panel isn’t accurately reflecting the actual temperature inside the smoking chamber. There are a few things you can do to troubleshoot this problem and get your smoker back to cooking at the correct temperature. First, check to make sure that the temperature probes for both the smoking chamber and the food are correctly placed.
If either of them is off by even a little bit, it can throw off the entire system. Once you’re confident that they’re in the right spot, take a look at the wiring to make sure everything is secure and not damaged in any way. Next, check the gasket around the door of the smoking chamber.
If it’s not sealing properly, heat will be able to escape and cool down your food. Make sure there’s no damage to the gasket and that it’s seated correctly in its groove. If necessary, replace it with a new one.
Finally, take a look at your vents. If they’re clogged or restricted in any way, that could also be causing your smoker to run too hot or too cold. Clean out any debris and make sure there’s nothing blocking airflow through the vents.
Once you’ve checked all of these things, try firing up your smoker again and see if it maintains a consistent temperature. If not, there may be an issue with your control panel itself and you’ll need to contact customer service for assistance.
Frequently Asked Questions (FAQs):
Why is My Electric Pit Boss Smoker Not Heating Up?
If your electric Pit Boss smoker is not heating up, there are a few potential causes. First, make sure that the power cord is plugged into an outlet and that the smoker is turned on. If the smoker is on but still not heating up, check to see if the heating element is working by using a multimeter to test for continuity.
If there is no continuity, then the heating element will need to be replaced. Another potential cause could be a faulty thermostat. You can test the thermostat with a multimeter as well; if it does not register continuity, then it will need to be replaced.
Finally, if your smoker has been in use for awhile, it’s possible that the insulation around the heating element has degraded and needs to be replaced.
Why is My Pellet Grill Not Heating Up?
If your pellet grill is not heating up, there are a few potential reasons why. First, check to make sure that the pellets are properly loaded and that the hopper is not empty. If the pellets are properly loaded but the grill still isn’t heating up, it’s possible that there is a blockage in the auger or burner.
To fix this, simply clear any blockages and restart the grill. If the grill still isn’t heating up after clearing any blockages, then there may be an issue with your igniter. Try replacing the igniter to see if that solves the problem.
Finally, if none of these solutions work, it’s possible that there is an issue with your pellet grill itself and you’ll need to contact customer service for assistance.
Is There a Fuse for Igniter on Pit Boss?
If you’re the proud owner of a Pit Boss smoker, you might be wondering if there’s a fuse for the igniter. The answer is yes, there is! The fuse is located on the control panel, and it’s easy to replace if needed.
Simply unscrew the old fuse and screw in a new one.
How Do You Change the Heating Element in a Pit Boss Smoker?
If your Pit Boss smoker isn’t heating up properly, it may be time to replace the heating element. Here’s how to do it:
1. First, make sure that the power is turned off and the smoker is unplugged.
2. Next, remove the grates and racks from the smoker chamber.
3. Locate the heating element on the side of the chamber. It will be a metal coil with wires attached to it.
4. Using a wrench or pliers, loosen and remove the nuts that secure the heating element in place.
5. Pull out the old heating element and dispose of it properly.
6. Insert the new heating element into place and hand-tighten the securing nuts until they’re snug but not too tight over-tightening can damage the threads.
If your Pit Boss heating element not working, there are a few things you can do to try and fix the problem. First, check to make sure that the heating element is properly plugged in. Next, check the circuit breaker to see if it has tripped.
If neither of these solutions works, then you may need to replace the heating element.