Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
There are a few things that could be causing your Austin XL pit boss auger to not turn. The first thing you should check is if the auger is properly plugged in and receiving power. If it is plugged in and still not turning, the next thing to check would be the switch that controls the auger.
If the switch is turned off, the auger will not turn on. Finally, if neither of those solutions work, it is possible that the motor itself is damaged and will need to be replaced.
So, why is Pit Boss Austin Xl Auger not turning? It could be due to a variety of factors, such as a faulty auger motor, a jammed auger, or a broken shear pin. Regardless of the cause, it’s essential to address the issue promptly to avoid further damage to your grill.
In this article, we will discuss the reasons why the Pit Boss Austin XL auger may not be turning and how to fix it.
Pit Boss Austin Xl Auger Not Turning
The Pit Boss Austin XL is a popular pellet grill that is loved by many outdoor cooking enthusiasts. However, like any other mechanical device, it is prone to malfunctions and breakdowns. One of the most common problems that Pit Boss Austin XL owners face is the auger not turning.
The auger is an essential component of the grill, responsible for feeding pellets into the firebox to maintain the desired temperature. If it fails to turn, the grill will not function correctly, and you won’t be able to cook your favorite meals.
Blockage in the Auger Tube:
One of the most common causes of the auger not turning in the Pit Boss Austin XL is a blockage in the auger tube. Over time, debris and pellets can accumulate in the tube, leading to a clog. To fix this issue, you need to remove the auger motor from the grill and then disconnect the auger from the motor. Use a long flexible wire to clean the tube thoroughly. After cleaning, reconnect the auger to the motor and test it to see if it’s turning.
Faulty Auger Motor:
Another reason why the auger may not be turning is a faulty motor. If the motor is not functioning correctly, it won’t be able to power the auger. To diagnose this issue, you need to check the voltage of the motor using a voltmeter. If the voltage is normal, the motor is not the problem, but if it’s not, then you need to replace the motor.
Broken Auger Belt:
The auger in the Pit Boss Austin XL is connected to a motor using a belt. If the belt is damaged or broken, the auger won’t turn. Inspect the belt for any signs of wear and tear, and if you notice any damage, replace it with a new one.
Faulty Controller:
The controller is the brain of the grill, responsible for regulating the temperature and controlling the auger. If the controller is faulty, it won’t be able to send the necessary signals to the auger motor to turn. Check the controller to ensure that it’s functioning correctly, and if it’s not, replace it.
If you are not comfortable troubleshooting the grill, it’s advisable to seek professional help to avoid causing further damage to the appliance. Remember to always prioritize safety when working with electrical appliances.
Pit Boss Austin Xl Auger Motor
The Pit Boss Austin XL is one of the most popular pellet smokers on the market, and for good reason. It’s a well-built unit that offers excellent value for the price, and it produces great results with both food and fuel economy. But like any appliance, it can eventually have problems, and one of the most common issues is with the auger motor.
If your Austin XL isn’t feeding pellets into the fire as efficiently as it used to, or if it’s having trouble igniting at all, then there’s a good chance that the auger motor is to blame. Thankfully, this is a relatively easy problem to fix yourself. In this article, we’ll walk you through the process of troubleshooting and replacing a faulty auger motor on your Austin XL.
Pit Boss Auger Motor Not Turning
If your Pit Boss auger motor isn’t turning, there are a few things you can check to troubleshoot the issue. First, make sure that the power switch is in the “on” position and that the cord is plugged into a working outlet. Next, check to see if the circuit breaker has tripped.
If it has, reset it and try again. Finally, if none of these solutions work, you may need to replace the auger motor.
Pellet Grill Auger Not Turning
If your pellet grill auger isn’t turning, there are a few things you can do to try and troubleshoot the issue. First, check to make sure that there is power getting to the grill. Next, check the auger motor to see if it is seized up or frozen.
If neither of these are the issue, then it is likely that the controller board is faulty and will need to be replaced.
Pit Boss Smoker Auger Motor
Pit Boss Smoker Auger Motor
The Pit Boss smoker auger motor is a key component to your smoking experience. This part turns the screw that feeds wood pellets into the fire pot.
Without it, you would have to constantly feed wood pellets by hand. The auger motor is what makes smoking with a Pit Boss convenient and easy.
Pit Boss Replacement Auger Motor
If your trusty Pit Boss smoker suddenly stops working, the problem may be with the auger motor. Luckily, this is a relatively easy fix that you can do at home. In this post, we’ll show you how to replace the auger motor on your Pit Boss smoker.
The first thing you’ll need to do is locate the auger motor. On most Pit Boss smokers, this is located near the bottom of the unit. Once you’ve found it, unplug the power cord from the outlet.
Next, use a Phillips head screwdriver to remove the two screws that hold the motor in place. With the screws removed, you should now be able to gently pull out the old auger motor. Take note of how it was positioned in case you have trouble putting in the new one.
Now it’s time to install the replacement motor. Simply insert it into place and screw it in using the two screws you removed earlier. Once everything is tightened down, plug your smoker back in and turn it on.
The new auger motor should now be up and running like new! If for some reason your smoker still isn’t working properly, please contact customer service for further assistance.
Frequently Asked Questions (FAQs):
Why is My Auger Not Turning on My Pit Boss?
If your auger isn’t turning on your Pit Boss, the first thing you should check is the power source. Make sure that the power cord is plugged in securely and that there is power to the outlet. If everything looks good there, the next step is to check the circuit breaker or fuse box.
Sometimes a tripped breaker can cause an appliance to stop working. Once you’ve checked all of these things and your auger still isn’t working, it’s time to call a professional for help.
How Do You Unstick an Auger on a Pit Boss?
If your auger is stuck, there are a few things you can do to try and unstick it. First, make sure that the power is turned off. Then, try using a plunger or something similar to push/pull the auger in different directions.
If this doesn’t work, you may need to disassemble the pit boss to get to the auger. Once you have access to the auger, you can try using a wire brush or other tool to clean out any debris that may be causing it to stick.
How Do You Know If Your Auger is Jammed?
If your auger is jammed, you won’t be able to turn it. The first thing you should do is check the area around the auger for any debris that may be causing the jam. If you can’t find anything, try turning the auger by hand to see if it will budge.
If it still doesn’t move, you may need to disassemble the auger to clear the jam.
How Do You Fix a Stuck Auger on a Pellet Stove?
If you have a stuck auger on your pellet stove, there are a few things you can do to try and fix it. First, make sure that there is no debris or obstruction blocking the auger. If there is, remove it and see if the auger will start moving again.
If not, you may need to disassemble the stove and clean out the auger housing. Once you’ve done that, reassemble the stove and try starting it again. If the auger still won’t move, it may be time to replace it with a new one.
Conclusion
If your Pit Boss Austin XL auger not turning, there are a few things you can try to fix the problem. First, check to make sure that the power cord is plugged in and that the outlet is working. Next, check the circuit breaker and reset it if necessary.
Finally, if the auger still isn’t turning, you may need to replace the drive belt.